Irell Mall Fullmetal Lady
Parameters
Number of STLs: 14×2 (unsupported + pre-supported)
Height: 45mm to eye level
Approximate resin usage: 12g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Avatar of the Mourner
Parameters
Number of STLs: 4×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 4.7g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Furtea Dominus
Parameters
Number of STLs: 4×2 (unsupported + pre-supported)
Dimensions: 38.8mm x 44.1mm x 65.4mm
Approximate resin usage: 28.9g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Lifeline Sister
Parameters
Number of STLs: 1×2 (unsupported + pre-supported)
Height: 31mm to eye level
Approximate resin usage: 3.3g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Ephra
Parameters
Number of STLs: 3×2 (unsupported + pre-supported)
Height: 28mm to eye level
Approximate resin usage: 2.6g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Assassin Sister
Parameters
Number of STLs: 1×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 1.4g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Magistrate Sister
Parameters
Number of STLs: 1×2 (unsupported + pre-supported)
Height: 28mm to eye level
Approximate resin usage: 2.3g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Verid
Parameters
Number of STLs: 3×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 3g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Sister of Great Guilt
Parameters
Number of STLs: 7×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 4.4g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Relict Sister
Parameters
Number of STLs: 2×2 (unsupported + pre-supported)
Height: 64.1mm total
Approximate resin usage: 3.4g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Ironpain Engine
Parameters
Number of STLs: 17×2 (unsupported + pre-supported)
Height: 70mm to eye level
Approximate resin usage: 15.9g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Herald
Parameters
Number of STLs: 3×2 (unsupported + pre-supported)
Height: 47mm to eye level
Approximate resin usage: 3.9g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Repentance Exosuits (build kit)
Parameters
Number of STLs: 25×2 + 1×2 (unsupported + pre-supported)
This kit can be used to assemble 43mm eye level miniatures
Approximate resin usage: 16.2g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Retribution Angels (build kit)
Parameters
Number of STLs: 74×2 + 5×2 (unsupported + pre-supported)
This kit can be used to assemble 32mm eye level miniatures
Approximate resin usage: 22.8g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Sisters of Minor Guilt (build kit)
Parameters
Number of STLs: 117×2 (unsupported + pre-supported)
This kit can be used to assemble 32mm eye level miniatures
Approximate resin usage: 59.3g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Sisters of Redemption (build kit)
Parameters
Number of STLs: 30×2 (unsupported + pre-supported)
This kit can be used to assemble 32mm eye level miniatures
Approximate resin usage: 28.2g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Redeemers Sisters Squad
Parameters
Number of STLs: 7×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 10.1g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Thorn Knights
Parameters
Number of STLs: 3×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 11.9g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Grimms
Parameters
Number of STLs: 3×2 (unsupported + pre-supported)
Height: 45mm total
Approximate resin usage: 20g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Unrepentants
Parameters
Number of STLs: 5×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 12.2g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Fallen Sisters
Parameters
Number of STLs: 4×2 (unsupported + pre-supported)
Approximate resin usage: 2.2g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Heavy Sisters Squad
Parameters
Number of STLs: 21×2 (unsupported + pre-supported)
Height: 32mm to eye level
Approximate resin usage: 34.6g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Biker Sisters Squad
Parameters
Number of STLs: 9×2 (unsupported + pre-supported)
Dimensions: 56.8mm x 26.3mm x 40.8mm
Approximate resin usage: 39.4g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance APC + all modifications
Parameters
Number of STLs: 63×2 (unsupported + pre-supported)
Dimensions: 109.9mm x 108.4mm x 137.6mm
Approximate resin usage: 198.9g (APC Update) / 177.8g (APC) (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Sorrow Keeper
Parameters
Number of STLs: 19×2 (unsupported + pre-supported)
Dimensions: 71.2mm x 120.2mm x 92.4mm
Approximate resin usage: 159.6g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Terrain
Parameters
Number of STLs: 7×2 (unsupported + pre-supported)
Approximate resin usage: 77.8g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Bases
Parameters
Number of STLs: 8×2 (unsupported + pre-supported)
Diameter: 32mm x5, 50mm x3
Approximate resin usage: 34.6g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Bases Decor
Parameters
Number of STLs: 7×2 (unsupported + pre-supported)
Approximate resin usage: 0.6g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Upgrade Kit
Parameters
Number of STLs: 8×2 (unsupported + pre-supported)
For miniatures 32mm to eye level
Approximate resin usage: 3.3g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Weapons Set (OnePageRules)
Parameters
Number of STLs: 10×2 (unsupported + pre-supported)
For miniatures 32mm to eye level
Approximate resin usage: 1.9g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Backpacks Set
Parameters
Number of STLs: 5×2 (unsupported + pre-supported)
For miniatures 32mm to eye level
Approximate resin usage: 1.4g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Robotic Arms Set
Parameters
Number of STLs: 12×2 (unsupported + pre-supported)
For miniatures 32mm to eye level
Approximate resin usage: 1.9g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Heads Set
Parameters
Number of STLs: 5×2 (unsupported + pre-supported)
For miniatures 32mm to eye level
Approximate resin usage: 0.5g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Objective Markers
Parameters
Number of STLs: 6×2 (unsupported + pre-supported)
Approximate resin usage: 49.5g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance Gauge and Dice
Parameters
Number of STLs: 7×2 (unsupported + pre-supported)
Dice sizes: 12mm, 14mm, 16mm
Approximate resin usage: 45.5g (Elegoo Standard Resin)
Scale: 28mm
Test-printed for resin printing
License
All rights reserved
Commercial use is only permitted with an active merchant license obtained via subscription
Order of Repentance
99.00$
Related products
hero of mankind
Short description for 2 string
why should I buy?
Monthly Bundles
A bundle of your choice
from DakkaDakka store
Sub bundle every month
Welcome Pack
The Welcome Pack #1
(38 STL files + 14 STL now)
The Welcome Pack #2
(27 STL files + 15 STL next month)
Special Projects
Special projects discounts
SP early access & sub rewards
titan of mankind
Short description for 2 string
why should I buy?
Monthly Bundles
A bundle of your choice
from DakkaDakka store
Sub bundle every month
Welcome Pack
The Welcome Pack #1
(38 STL files + 14 STL now)
The Welcome Pack #2
(27 STL files + 15 STL next month)
Special Projects
Special projects discounts
SP early access & sub rewards
mighty demigod
Short description for 2 string
why should I buy?
Monthly Bundles
A bundle of your choice
from DakkaDakka store
Sub bundle every month
Welcome Pack
The Welcome Pack #1
(38 STL files + 14 STL now)
The Welcome Pack #2
(27 STL files + 15 STL next month)
Special Projects
Special projects discounts
SP early access & sub rewards
hero of mankind
Short description for 2 string
why should I buy?
Monthly Bundles
A bundle of your choice
from DakkaDakka store
Sub bundle every month
Welcome Pack
The Welcome Pack #1
(38 STL files + 14 STL now)
The Welcome Pack #2
(27 STL files + 15 STL next month)
Special Projects
Special projects discounts
SP early access & sub rewards
titan of mankind
Short description for 2 string
why should I buy?
Monthly Bundles
A bundle of your choice
from DakkaDakka store
Sub bundle every month
Welcome Pack
The Welcome Pack #1
(38 STL files + 14 STL now)
The Welcome Pack #2
(27 STL files + 15 STL next month)
Special Projects
Special projects discounts
SP early access & sub rewards
mighty demigod
Short description for 2 string
why should I buy?
Monthly Bundles
A bundle of your choice
from DakkaDakka store
Sub bundle every month
Welcome Pack
The Welcome Pack #1
(38 STL files + 14 STL now)
The Welcome Pack #2
(27 STL files + 15 STL next month)
Special Projects
Special projects discounts
SP early access & sub rewards